ANYCUBIC Reviews 2,004

I am very satisfied with my Anycubic Kobra S1 Combo, the prints are very good for my requirements and I have already been able to implement many projects. After a failure of my ACE pro, the power s... See more

I have the Kobra S1 from Anycubic and I had an issue with a print that caused some damage to the hot end. I contacted their support and within 24 hours I recieved a response. They were quick and they... See more

The five stars are really for the customer service rather than the product, bought a kobra s1 combo. Since week 3 had problems with clogging with their own high speed filament. With other brands had n... See more

Had an issue with my Kobra S1 stopping 10% into a print. Contacted customer support and they guided me through trouble shooting the issue. They were prompt and courteous.

I have purched the kobra 3v2 combo printer, on presale, it took a while to arive but i am verry happy with it, it was almost plug and play, after a few hundred hours of printing i had a small isue wit... See more

i use my printer everyday and all of em will break to some extent ... Anycubic's support is both fast and comprehensive .. they take care of problem and sent parts quickly... sure shipping from china... See more

Purchased a Kobra S1 back in January 2025. Has just under 2000hrs on it, and it has run great 90% of the time. I recently started noticing an underextrusion issue even woth a new hotend and dried fi... See more

Printer arrived, but had been shipped with 2 pin power extension for mainland Europe. Contacted support and received a quick response and resolution - posting out x2 3 pin adapters that I needed for t... See more

Purchased a Kobra 3 V2 Combo from Anycubic, arrived in 4 days. Had a issue with one of the fan motors in the Ace Pro Filament MANAGEMENT SYSTEM. ANYCUBIC shipped 2 new fan motors as well as detaile... See more

This was my first Anycubic printer (Kobra 3 Max Combo). I was resigned to the fact that the hotbed took forever to heat, but then it would start to get bed heating errors, and finally, nothing but... See more

I have had my kobra 3 v1 for 9mo and put just over 2000hrs on it with zero issues till recently. The machine keep saying that the extruder was clogged so I tried to take a look and found that it was n... See more

Last week my kobra 3 had a clog which resulted in the extruderunit breaking. I still had warrantee so i contacted anycubic support. No questions asked they sent me a new unit. It said it would arrive... See more

The support for my Anycubic Kobra 3 max printer was wonderful. By using videos to show the issues I was having, the support team was able to diagnose my issue and send out a replacement motherboard a... See more

I had an issue where the video capture was upgraded with a firmware upgrade but required a slicer upgrade to enable. Tried several slicer downloads with no luck. I reached out to Anycubic and got a r... See more

So I purchased a 3d printer through Anycubic (kobra s1 combo) That was having Issues with clogging and hot end issues! I went to the support for assistance all they required was picture proof of issue... See more

I have had couple issues with the printer that I got. Got in contact with customer service and the experience has been phenomenal. They were very helpful and were able to assist with my issues and se... See more

Gavin was great he helped alot and resolved my issue with not problem nor blame. Gavin and I built a relationship out of this I also asked his advice on my next printer. I want to get the Kobra 3 max... See more

I am Wes from mad mask custom anycubic have always help me fast and in the past I was doing reviews for them I hope to come back Wes is back and health again peace Wes shout out to anycubic

Had my Kobra S1 since April and I’ve been very happy with the printer it’s printed flawlessly until it’s picked up an issue at 1000 hours with ams retraction. This has been reported to their support t... See more

I have 3 Anycubic 3 v2 combos. They have been amazing for us! When I run into a few minor snags, reaching out to support was simple. They were able to walk me through to find the issues. And if I nee... See more

The UV-printer of the company are very good. There are greate results possible. The handling of the slicer is very easy. With my starting problems to connect the slicer software with the printer I h... See more

Although my Kobra Max 3's motherboard died after about a month of purchasing, the Anycubic team gave me an expedited solution and shipped me the extra accessories in order to fix it. Their team wa... See more

Great service!!! Very prompt reply. Mark from Customer Service was extremely helpful in resolving the issue with the part. Thank you.

Great costumer service, fast reply, and very kind people overall, favorite brand of printers, because of their service and machines, keep it up!

I've purchased an Kobra 3 V2 about half a year ago. Recently my printer had gotten a problem, it wouldn't start up anymore and the display would stay dark. After a very quick online research i've fo... See more

I have enjoyed my Kobra s1 printer quite a bit. It's got myself 700 his on it. The best thing I can say about the company is that they have excellent customer support. I have been working with Gavin... See more

After print a few prints throught thew AMS system, spool # 4 would not engage. After a few quick emails with support, they sent me a new filament sensor. It arrived in a week and after installation fi... See more

The support team reply quickly and give me the perfect solution for my stepper issue, now my printer works as a new one, I love my kobra 2 max, Thank you Anycubic

I HAVE HAD TO REACH OUT FOR A NUMBER OF REASONS AND GET NOTHING BUT GREAT SERVICE AND RESPONSES. HAVE HAD A COUPLE OF ISSUES WITH THE PRINTER AND THEY WERE ON TOP OF IT NO PROBLEMS NO FUSS JUST REALLY... See more

HAd a problem with my lcd, it was still under warranty, they sent a replacement, arrived faster than expected, changed it and its working again

Always get great support with Anycubic, very fast response times and very helpful.

Every issue I have had with my Kobra 3 and my Kobra S1 Anycubic support has responded quickly, often within hours of when I submit a ticket.

Top Service, I'm very satisfied. For Anycubic: goes on in this way, Bravi

I Purchased 2 kobra s1 combos and they are great! Customer service is also great!

Very supportive and patient customer service. Successfully and quickly helped to resolve issues with printer.

GREAT WORK Customer service. Error "The vibration compensation process abnormal. Please check the X-axis accelerometer gyroscope module and wiring"..... It took 2 months to get the problem resolved a... See more

Great buying experience, I had a small mechanical issue during setup and printing. Sent and email to support on the weekend! Got the standard automated response within hours, got a human response wi... See more

I have a cobra 3 combo. My ace pro broke a gear. I contacted support. Just under 24 hours they contacted me back and solved my issue. It is rare now to have great customer service. Witch I am thank... See more

The people at Anycubic have always been so professional and helpful. They really know their stuff too. Its a great experience every time no matter the issue. Shipping for the replacement parts is al... See more

Greate seller and very quick technical support.

Anycubic's support was excellent. If you need help, the team is the perfect place to go. They respond quickly and competently. Thank you.

They treated me very well; given the situation they found me in, they offered me a satisfactory solution. Now I just have to wait for the part

I had an issue with some hardware parts. Contacted the support and got an replacement part under warranty. On top of that i got two replacement parts that i lost myself for free too. They could have c... See more